Microcolumn ion chromatography with conductimetric detection

Summary A miniaturized flow cell for an electrical conductivity detector has been made and applied to the ion chromatography of inorganic anions. It consisted of stainless steel tubes (0.13 mm ID×0.31 mm OD) and PTFE tubes (0.25 mm ID×2 mm OD). The detection limit for chloride at S/N=3 was 36 pg or 0.33 ppm for a 0.11 l injection.     

Solvents inducing oxidation of hydroxylamines

Hydroxylamines gradually undergo oxidation to their oximes on being dissolved in organic solvent (e.g. methanol). This phenomenon was followed by (1)H-NMR and liquid chromatography-mass spectrometry (LC-MS). The oxidation rate was estimated from the peak area observed on the mass chromatogram at the protonated molecule or fragment ion on LC-atmospheric pressure chemical ionization (APCI)-MS. The results showed that the oxidation rate of hydroxylamines depended on the solvent type.     

THE ROLE OF DIOXYGEN SPECIES IN THE BASE- AND COBALT-CATALYZED OXYGENATION OF HINDERED PHENOLS

Abstract— The mechanisms by which 4-substituted 2,6-di- t -butylphenols are oxygenated by base- and Co(II) Schiff base complex-catalysis into o - or p -peroxyquinols and their Co(III) complexes, respectively, have been investigated. For the base-catalyzed oxygenation, a one-step ionic mechanism involving no radical species is suggested to be the most probable one. For the formation of the peroxycobalt(III) complexes, the following stoichiometry is concluded: ArOH + Co(II) + 5/4 O₂→ peroxycobalt(III) complex + 1/2 H₂O. A mechanism involving an electron transfer between the phenols and the Co(II)-O₂ complex followed by further electron transfer between the formed phenoxy radicals and the Co(II) complex to give the corresponding phenolate anions is proposed.     

On the use of methyl substituted poly(vinylnaphthalene) as a reversible singlet oxygen carrier

Poly(1,4-dimethyl-6-vinylnaphthalene) and poly(1,2,4-trimethyl-6-vinylnaphthalene) react with singlet oxygen to give corresponding endoperoxide polymers which on warming generate singlet oxygen efficiently. Singlet oxygenations by the use of these polymers have been described.     

Atomic absorption spectrometry of traces of tri- and hexavalent chromium

Summary Atomic absorption spectrometry combined with extraction is described for the determination of tri- and hexavalent chromium. The chromium diethyldithiocarbamate chelate was used for chromium (VI), whereas hydroxyquinolate or thenoyltrifluoroacetonate chelate for chromium(III). The method is rapid and precise.

---

Zusammenfassung Extraktion und darauffolgende Messung der Atomarabsorption wurden zur Bestimmung von drei- und sechswertigem Chrom verwendet. Die Chelatverbindung mit Diäthyldithiocarbamat wurde für Chrom(VI), der Chelatkomplex mit Hydroxychinolin oder Thenoyltrifluoraceton für Chrom(III) verwendet. Das Verfahren ist rasch und genau.

     

X-ray scattering by water molecules studied by using synchrotron radiation

The energy spectra of free water molecules were measured at scattering angles 2θ ranging from 10.5° to 75.7°, using an angle-dispersive-type diffractometer and synchrotron radiation as an X-ray source. A silicon (111) monochrometer was used to obtain incident X-rays with the wavelengths of (1.543/n) Å (n = 1,3,4,5). Observed inelastic scattering peaks are clearly separated from eleastic ones at s values [s = (4π/λ) sin Å] larger than 8 Å^?1. The increase of the separation with an increasing s value was consistent with the classical theory of the Compton shift. The total (elastic plus inelastic) intensities were obtained over a range of s = 0.74–5.0 Å^?1. Experimental difference intensities Δσ_ee and Δσ_ne were obtained separately by combining the X-ray and high-energy electron scattering data. The experimental results are in reasonable agreement with the theoretical intensities calculated from SCF and CI molecular wave functions with a basis set of double-zeta plus polarization functions. © 1994 John Wiley & Sons, Inc.     

Spectroscopic study of atomization processes and inter-element effects on the flame emission of chromium and iron in an air—acetylene flame

Emission spectroscopy is applied for characterization of reactions occurring in air—acetylene flames normally used for atomic absorption spectrometry. Inter-element effects on the emissions of chromium and iron are discussed. Two atomic emission lines with different upper energies and a molecular emission line of the diatomic oxide MO are compared for determination of the excitation temperature and the degree of atomization in fuel-rich and lean flames. The reductive power of the fuel-rich flame is essential for atomization of chromium salts. Inter-element effects by iron can be attributed to the formation of refractory oxides, and to mutual catalytic oxidation.     

Molecular structure of 3-methylthiophene studied by gas electron diffraction combined with microwave spectroscopic data

The molecular structure of 3-methylthiophene

has been determined by gas electron diffraction (GED) combined with microwave (MW) spectroscopic data. Ab initio calculations at the HF/3–21G* level were carried out and used as structural constraints in the data analysis. The torsional vibration of the methyl group was treated as a large-amplitude motion. The structural parameters were determined to be: r_g(S---C₂) = 1.719(2) Å, r_g(C₂=C₃) = 1.370(3) Å, r_g(C₃---C₆) = 1.497(6) Å, r_g(C₂---H) = 1.101(5) Å, CSC = 91.6(2)°, SC₂C₃ = 113.3(5)°, SC₅C₄ = 111.3(3)°, C₂C₃C₆ = 123.2(11)° and C₃C₆H = 112(2)°. The values of r(S---C₂) − r(S---C₅) and r(C₂=C₃) − r(C₄=C₅) were fixed at the 3–21G* value of 0.002Å. Parenthesized values are the estimated limits of error (3σ) referring to the last significant digit.     

Molecular structure of 3-methylthiophene studied by gas electron diffraction combined with microwave spectroscopic data

The molecular structure of 3-methylthiophene has been determined by gas electron diffraction (GED) combined with microwave (MW) spectroscopic data. Ab initio calculations at the HF/3–21G* level were carried out and used as structural constraints in the data analysis. The torsional vibration of the methyl group was treated as a large-amplitude motion. The structural parameters were determined to be: r_{g(S---C2) = 1.719(2) Å}, r_{g(C2=C3) = 1.370(3) Å}, r_{g(C3---C6) = 1.497(6) Å}, r_{g(C2---H) = 1.101(5) Å}, CSC = 91.6(2)°, SC₂C₃ = 113.3(5)°, SC₅C₄ = 111.3(3)°, C₂C₃C₆ = 123.2(11)° and C₃C₆H = 112(2)°. The values of r(S---C₂) - r(S=C₅) and r(C₂=C₃)-r(C₄ =C₅) were fixed at the 3–21G* value of 0.002 Å. Parenthesized values are the estimated limits of error (3σ) referring to the last significant digit.     

Application of pure silica gel as cation-exchange stationary phase in lon chromatography with indirect photometric detection for common mono-and divalent cations using aromatic monoamines as eluents

Summary A pure silica gel (Pia Seed 5S-60-SIL), synthesized by the hydrolysis of pure tetraethoxysilane [Si(OCH₂CH₃)₄], was applied as a cation-exchange stationary phase in ion chromatography with indirect photometric detection for common mono-and divalent cations (Li⁺, Na⁺, NH₄ ⁺, K⁺, Mg²⁺, and Ca²⁺) using various protonated aromatic monoamines (tyramine [4-(2-aminethyl) phenol], benzylamine, phenylethylamine, 2-methylpyridine and 2,6-dimethylpyridine) as eluet ions. When using 0.75 mM tyramine-0.25 mM oxalic acid-1.5 mM 18-crown-6 (1,4,7,10,13,16-hexaoxacyclooctadecane) at pH 5.0 as the eluent, excellent simultaneous separation and highly sensitive detection at 275 nm for these mono-and divalent cations were achieved on the Pia Seed 5S-60-SIL column (150×4.6 mm I.D.) in 20 min.